ABB REC650 - Designed to Communicate; Basic IED Functions

2.3 Designed to communicate
IEC 61850/Function block
name
ANSI Function description Bay
REC650 (A01)
1CBA
REC650 (A02)
1CBAB
REC650 (A07)
BCAB
Station communication
IEC 61850 communication protocol, LAN1 1 1 1
DNP3.0 for TCP/IP communication protocol, LAN1 1 1 1
IEC61870-5-103 IEC60870-5-103 serial communication via ST 1 1 1
GOOSEINTLKRCV Horizontal communication via GOOSE for interlocking 59 59 59
GOOSEBINRCV GOOSE binary receive 4 4 4
ETHFRNT
ETHLAN1
GATEWAY
Ethernet configuration of front port, LAN1 port and
gateway
GOOSEDPRCV GOOSE function block to receive a double point value 32 32 32
GOOSEINTRCV GOOSE function block to receive an integer value 32 32 32
GOOSEMVRCV GOOSE function block to receive a mesurand value 16 16 16
GOOSESPRCV GOOSE function block to receive a single point value 64 64 64
2.4 Basic IED functions
IEC 61850/Function
block name
Function description
Basic functions included in all products
INTERRSIG Self supervision with internal event list 1
SELFSUPEVLST Self supervision with internal event list 1
SNTP Time synchronization 1
TIMESYNCHGEN Time synchronization 1
DTSBEGIN, DTSEND,
TIMEZONE
Time synchronization, daylight saving 1
IRIG-B Time synchronization 1
SETGRPS Setting group handling 1
ACTVGRP Parameter setting groups 1
TESTMODE Test mode functionality 1
CHNGLCK Change lock function 1
TERMINALID IED identifiers 1
PRODINF Product information 1
PRIMVAL Primary system values 1
Table continues on next page
1MRK 511 248-UEN - Section 2
Available functions
17
Commissioning Manual