20. Ordering for Configured IED
Guidelines
Carefully read and follow the set of rules to ensure problem-free order management.
Please refer to the available functions table for included application functions.
To obtain the complete ordering code, please combine code from the tables, as given in the example below.
Exemple code: REC650*1.2-A01AX00-X00-B1A5-B-A-SA-AB1-RA3-AAAA-E. Using the code of each position #1-11
specified as REC650*1-2 2-3-4 4-5-6-7 7-8 8-9 9-10 10 10 10-11
# 1 - 2 - 3 - 4 - 5 6 - 7 - 8 - 9 - 10 - 11
REC650* - - - - - - - - -
Position
SOFTWARE #1 Notes and Rules
Version number
Version no 1.2
Selection for position #1. 1.2
Configuration alternatives #2 Notes and Rules
Single breaker for single busbar A01A
Single breaker for double busbar A02A
Bus coupler for double busbar A07A
ACT configuration
ABB standard configuration X00
Selection for position #2. X00
Software options #3 Notes and Rules
No option X00
Selection for postition #3 X00
First HMI language #4 Notes and Rules
English IEC B1
Selection for position #4.
Additional HMI language #4
English US
A6
Selection for position #4. B1 A6
Bay control REC650 ANSI 1MRK 511 265-BUS B
Product version: 1.2
102 ABB
To Next Page
Loading...
