35
20. Technical data
Description Value
Width
frame
case
Height
frame
case
Depth case
Weight
complete protection relay
plug-in unit only
Description Type 1 Type 2
Nominal auxiliary voltage U
n
Maximum interruption time in the auxiliary
DC voltage without resetting the relay
n
Auxiliary voltage variation
Start-up threshold
Burden of auxiliary voltage supply under
quiescent (P
q
Ripple in the DC auxiliary voltage
Fuse type
—
Table 6. Dimensions
—
Table 7. Power supply
—
Table 8. Energizing inputs
Description Value
Rated frequency
Current inputs Rated current, I
n
Thermal withstand capability:
- Continuously
Dynamic current withstand:
- Half-wave value
Input impedance
Voltage input Rated voltage
Voltage withstand:
- Continuous
Burden at rated voltage
1) Ordering option for ground current input
Description Value
Current sensor input Rated current voltage (in secondary slide)
Continuous voltage withstand
Voltage sensor input Rated voltage
Continuous voltage withstand
—
Table 9. Energizing input (sensors)
2) Depending on the used nominal current (hardware gain)
3) This range is covered (up to 2*rated) with sensor division ratio of 10 000:1
To Next Page
Loading...
