53
—
Table 73. Arc protection (ARCSARC)
Characteristic Value
Operation accuracy
Depending on the frequency of the measured current: f
n
Operate time
Minimum Typical Maximum
Operation mode = "Light
Operation mode = "Light only"
Reset time
Reset ratio
n
n
= 50 Hz, fault with nominal frequency, results based on statistical distribution of 200 measurements
2) Includes the delay of the heavy-duty output contact
3) Normal power output
4) High-speed output
—
Table 74. Arc protection (ARCSARC) main settings
—
Table 76. Multipurpose protection (MAPGAPC) main settings
Parameter Function Value (range) Step
Phase start value ARCSARC
n
ARCSARC
n
Operation mode ARCSARC
-
Parameter Function Value (range) Step
Start value
Operate delay time
Operation mode
-
—
Table 75. Multipurpose protection (MAPGAPC)
Characteristic Value
Operation accuracy
—
Table 72. Switch onto fault (CBPSOF) main settings
Parameter Function Value (range) Step
SOTF reset time CBPSOF
—
Table 77. Fault locator (SCEFRFLO)
Characteristic Value
Measurement accuracy
At the frequency f = f
n
Impedance:
Distance:
To Next Page
Loading...
