ABB REF615 ANSI 5.0 FP1 User Manual

63
—
Table 110. Three-page power and energy measurements (SPEMMXU and PEMMXU)
Characteristic Value
Operation accuracy

n

n
At the frequency f
n







Suppression of harmonics

n

φ
φ
—
Table 111. RTD/mA measurement (XRGGIO130)
Parameter Value (range)
RTD inputs
Supported RTD sensors












Supported resistance range 
Maximum lead resistance (threewire
measurement)

Isolation 
Response time 
 
Operation accuracy
Resistance Temperature



mA inputs
Supported current range 
Current input impedance 
Operation accuracy 
—
Table 112. Frequency measurement (FMMXU)
Characteristic Value
Operation accuracy



ABB REF615 ANSI 5.0 FP1 Specifications

General

Rated Frequency	50/60 Hz
Binary Outputs	Up to 8
Device Type	Feeder Protection Relay
Version	5.0 FP1
Protection Functions	Overcurrent, Earth Fault, Thermal overload, Under/Overvoltage, Under/Overfrequency
Communication Protocols	IEC 61850, Modbus, DNP3
Auxiliary Supply Voltage	110-250 V DC/AC
Mounting	Flush mounting
Operating Temperature Range	-40 °C to +70 °C
Dimensions	177 x 177 x 150 mm (H x W x D)
Housing	Plastic
Standard	IEC 60255
Input Voltage	110-240 V AC/DC
Enclosure	IP54