Need help?Do you have a question about the ABB REF615 ANSI 5.0 FP1 and is the answer not in the manual?
General| Rated Frequency | 50/60 Hz |
|---|---|
| Binary Outputs | Up to 8 |
| Device Type | Feeder Protection Relay |
| Version | 5.0 FP1 |
| Protection Functions | Overcurrent, Earth Fault, Thermal overload, Under/Overvoltage, Under/Overfrequency |
| Communication Protocols | IEC 61850, Modbus, DNP3 |
| Auxiliary Supply Voltage | 110-250 V DC/AC |
| Mounting | Flush mounting |
| Operating Temperature Range | -40 °C to +70 °C |
| Dimensions | 177 x 177 x 150 mm (H x W x D) |
| Housing | Plastic |
| Standard | IEC 60255 |
| Input Voltage | 110-240 V AC/DC |
| Enclosure | IP54 |
To Previous Page
