ABB REL 511-C1 2.5 Series - Settings

24
Settings &KDSWHU
8QGHUVWDQGWKH+0,WUHH
 6HWWLQJV
 *HQHUDO
Use this menu to select and set the different parameters for included protection and con-
trol functions in the REx 5xx terminal. There are four selectable and editable settings
group, each independent of the other, to structure desired functions and applications.
 'LVWXUE5HSRUW
This menu includes all setting parameters for the disturbance report. The following fea-
tures are available:
• 6HTXHQFHQXPEHUcan be set for each recorded disturbance.
• 6DPSOLQJUDWHis fixed at 1000 Hz.
• 5HFRUGLQJWLPHV for pre-fault, post-fault and time limit shall be set.
• )DXOWORFDWRUVHWWLQJV shall be done here. It includes measurement duration and
presentation of the result.
 )XQFWLRQV
Settings of the parameters for the included protection and control functions are done
here. Four separate setting groups are avaible. First select desired group and then de-
sired function.
 &KDQJH$FW*US
To set the internal time in the REx 5xx terminal. The time is set in the form of YYYY-
MMM-DD and hh:mm:ss. All values but the month are presented with digits. The
month are presented with the first three letters in current month.
 7LPH
To set the internal time in the REx 5xx terminal. The time is set in the form of YYYY-
MMM-DD and hh:mm:ss. All values but the month are presented with digits. The
month are presented with the first three letters in current month.