ABB REL 511-C1 2.5 Series - Terminal Report

25
TerminalReport &KDSWHU
8QGHUVWDQGWKH+0,WUHH
 7HUPLQDO5HSRUW
 *HQHUDO
Use this menu to display information of the self supervision, terminal identity, software
version, modules and the analogue inputs.
 6HOI6XSHUY
The REx 5xx terminal has extensive built-in self-supervision functions to detect if in-
ternal faults occurs. If an error occurs, the green LED on the front panel will flash and
a warning signal will be activated. Use the self-supervision report to get information
about detected faults.
The self-supervision report can also be used to check the status of each installed module
as well as CPU, memory and clock operation.
 ,GHQWLW\1R
The terminal identity feature contains information as serial number and the software
version installed in the terminal.
 0RGXOHV
This menu includes information about all included modules, such as I/O-modules and
MPM-module (CPU).
 $QDORJ,QSXW
Includes information about the analogue inputs, voltage and current, concerning nomi-
nal and rated values.