28
Configuration &KDSWHU
8QGHUVWDQGWKH+0,WUHH
• Clear the LEDs.
/RFDO+0,
Use this menu to to block the possibility to change settings via remote communication.
,GHQWLILHUV
Use the identifiers to define and specify the location of and to define a terminal within
the power system. All identifier names are typed as strings, maximum 16 characters,
and the identity numbers are typed with digits. Typical usage are:
• name and number of the station.
• name and number of the bay or object.
• name and number of the actual REx 5xx terminal.
6HOHFWODQJXDJH
Use this menu to select language on the local HMI, if a second language beside English
is ordered.
To Next Page
Loading...
