ABB REL670 - Function for Energy Calculation and Demand Handling ETPMMTR; LDCM Clear Counters; Reset Disturbances and Event List DRPRDRE; Reset Leds

13.1.1.5 Reset pulse counter PCGGIO
The Pulse counter is reset under Reset counters menu in the HMI tree.
Main menu/Reset/Reset counters/PulseCounter(GGIO)/PC
In the dialog box that appears, choose YES to reset.
13.1.1.6
LDCM clear counters
Main menu/Reset/Reset counters/LDCMCommunication/LDCMX
Activating Reset of LDCM counters sets the counter concerned to zero. A reset can be
performed by affirmation in the dialog box. This is done by pressing the E key when
YES is highlighted.
13.1.1.7 Function for energy calculation and demand handling ETPMMTR
Main menuReset/Reset counters/ThreePhEnergMeas(MMTR)/ETP
Resetting accumulated energy values and the maximum demand values.
13.1.2 Reset disturbances and event list DRPRDRE
Disturbances are reset under Reset menu in the HMI tree.
Main menu/Reset/Reset disturbances
The internal event list is reset under Reset menu in HMI tree.
Main menu/Reset/Reset internal eventlist
13.1.3 Reset LEDs
13.1.3.1 Start and trip LEDs
By activating this reset, the colored LEDs above the LCD, if they are latched, will be
reset.
Main menu/Reset/Reset LEDs/Start and trip LEDs
In the dialog box that appears, choose YES to reset.
Section 13 1MRK506276-UUS B
Reset
100
Operator's manual