9.1.2.2 TimeSynch
Main menu/Settings/Time/Synchronization/TimeSynch
Here the parameters FineSyncSource, CourseSyncSrc and SyncMaster are switched on
or off.
9.1.2.3
TimeSynchBIN
Main menu/Settings/Time/Synchronization/TimeSynchBIN
Binary input synchronization settings available here are the position of the of the
module, the number of the binary input and the detection mode.
9.1.2.4 TimeSynchDSTBegin
Main menu/Settings/Time/Synchronization/TimeSynchDSTBegin
The starting point for Daylight Savings Time is set here.
9.1.2.5 TimeSynchDSTEnd
Main menu/Setttings/Time/Synchronization/TimeSynchDSTEnd
The end point of Daylight Savings Time is set here.
9.1.2.6 TimeSynchIRIG-B
Main menu/Settings/Time/Synchronization
The type of input, time domain, type of encoding and time zone for IRIG-B are set here.
9.1.2.7 TimeSynchSNTP
Main menu/Settings/Time/Synchronization/TimeSynchSNTP
Here the IP addresses for the Simple Network Time Protocol servers are set.
9.1.2.8 TimeZone
Main menu/Settings/Time/Synchronization/TimeSynch
The time zone according to Coordinated Universal Time (UTC) is set here.
Section 9 1MRK506276-UUS B
Read and change settings
40
Operator's manual
To Next Page
Loading...
