ABB Relion 605 Series - Page 70

Section 5 1MDU07212-YN Rev. D
Use of LHMI
64 REF601 / REJ601 / REM601
Application Manual
Test Continue
YES:UP NO:DOWN
Toggle LEDsToggle LEDs
Select ‘Yes’ with:Select ‘Yes’ with: Confirm with:Confirm with:
NO or timeout to confirm
will lead to exit test
NO or timeout to confirm
will lead to exit test
LED TEST
Test Continue
YES:UP NO:DOWN
LED Test
Figure 23: Hardware test menu of relay REF601/REJ601/REM601 with its submenu
(Continue)
5.2.8.2 Submenu – Binary output test
Submenu binary output test allows to force a binary output. The forced output
operates for a pulse duration of 1 sec.
Test
Hardware :YYY
Test
Test
BO
NO; YESNO; YES
Select ‘Yes’ with:Select ‘Yes’ with: Confirm with:Confirm with:
BO Test
BO1 :YYY
Test
Functional
NO; YESNO; YES
Select ‘Yes’ with:Select ‘Yes’ with: Confirm with:Confirm with:
BO Test
BO2 :YYY
Select ‘Yes’ with:Select ‘Yes’ with: Confirm with:Confirm with:
BO Test
BO3 :YYY
Select ‘Yes’ with:Select ‘Yes’ with: Confirm with:Confirm with:
BO Test
BO4 :YYY
Select ‘Yes’ with:Select ‘Yes’ with: Confirm with:Confirm with:
BO Test
BO5 :YYY
Select ‘Yes’ with:Select ‘Yes’ with: Confirm with:Confirm with:
BO Test
BO6 :YYY
NO; YESNO; YES
NO; YESNO; YES
NO; YESNO; YES
NO; YESNO; YES
Figure 24: Binary output test menu of relay REF601/REJ601/REM601 with its submenu
(Continue)