ABB Relion 605 Series - Access Level; Version Information

Section 5 1MDU07212-YN Rev. D
Use of LHMI
66 REF601 / REJ601 / REM601
Application Manual
5.2.9 Access level
This menu provides the password change facility for the different access levels.
Only Admin can change the password of the other access levels. Activating edit
mode by pressing Enter and Cancel button together can change password. User can
then enter new password. Enter button must be pressed before timeout period after
changing the password. Password can be of six different combinations of the
navigation keys. Each navigation key has its unique ID (1..4) which will be
selected as password for the different access levels. Only two key combinations
can be used for password entry/selection.
Figure 26: Access level menu
5.2.10 Version information
This menu provides information regarding the Product type selected, Software
version being presently loaded into the product, Model name, Nominal current
value selected, and the type of trip circuit present.
Figure 27: Version information menu
Access Level Setting Level Setting Level
Password:____
Admin Level Admin Level
Password:____
Allowed symbols for:
- Simple password: 
- Alphanumeric password:
“A” to “Z”, “0” to “9”, “_“
Access Level Setting Level Setting Level
Password:____
Admin Level Admin Level
Password:____
For simple password handling:
Key 1 when user enters 1
st
key
Key 2 when user enters 2
nd
key
For simple password handling:
Key 1 when user enters 1
st
key
Key 2 when user enters 2
nd
key
Version Info
Product Name
XXX601
Base Software
Version XX.XX
Comm Software
Version XX.XX