ABB Relion 670 series - Accessing the Maintenance Menu; Recovering Passwords and IED Defaults

Event number Acronyms GSAL mapping English
3710 CAM_SRV_COMM_OK GSAL.Ina CAM Server communication
successful
3810 CAM_SRV_COMM_FAIL GSAL.Ina CAM Server communication failed
3820 CAM_REPLICATION_NO_USERS GSAL.Ina Replication performed. No users
replicated!
3830 CAM_REPLICATION_NO_CAPACITY GSAL.Ina Replication attempted but failed. No
capacity.
4210 SSL_CONN_FAIL_CERT GSAL.AuthFail SSL Connection failed - Certificate
validation failed
5110 MANUAL_RESET GSAL.Ina Manual reset
5270 SYS_STARTUP GSAL.Ina System startup
5280 SYS_SHUTTING_DOWN GSAL.Ina System shutting down
6110 TEST_MODE_START_OK GSAL.Ina Test Mode started successfully
6120 TEST_MODE_END GSAL.Ina Test mode ended successfully
6130 CONTRL_OP_PERF_OK GSAL.Ina Control operation performed
successfully
6132 CONTRL_OP_PERF_FAIL GSAL.Ina Failed to perform a control operation
6140 SIGN_FORCED_VALUE GSAL.Ina Signal forced - value changed
successfully
7310 HW_CHANGE_DETECTED GSAL.Ina Hardware change detected
8010 RECOV_PREV_CONFIG_OK GSAL.Ina Recovery of previous configuration
successful
8020 DATE_TIME_SET_OK GSAL.Ina Date and time set successfully
8030 NEW_CERT_GEN_OK GSAL.Ina New certificate generated
successfully
8210 RECOV_PREV_CONFIG_FAIL GSAL.Ina Recovery of previous configuration
failed
8230 NEW_CERT_GEN_FAIL GSAL.Ina New certificate generation failed
9010 ATT_DET_FLOODING GSAL.Ina Flooding attack detected
9530 PKI_CERT_EXP_NEAR GSAL.Ina Certificate about to expire
9620 X509_CERT_EXPIRED GSAL.Ina Certificate validation failed -
Certificate expired
9640 X509_CERT_UNTRUSTED GSAL.Ina Certificate validation failed -
Certificate signature check failed
10010 MAINT_ENTER_MENU_OK GSAL.Ina Device successfully entered
maintenance menu due to user
action
10020 MAINT_FORCED_MENU_OK GSAL.Ina Device successfully forced into
maintenance menu due to new state
10030 MAINT_FTP_ACTIV_OK GSAL.Ina FTP server successfully activated
from maintenance menu
10032 MAINT_FTP_ACTIV_FAIL GSAL.Ina Activation of FTP server from
maintenance menu failed
10040 MAINT_UPDATE_ABORT_OK GSAL.Ina Firmware update procedure aborted
successfully
Table continues on next page
1MRK 511 399-UEN B Section 6
User activity logging
670 series 2.2 IEC 83
Cyber security deployment guideline