Parameter Values (Range) Unit Step Default Description
Default Var Obj 32 1=1:32bit AI evt
2=2:16bit AI evt
3=3:32bit AI
evt&time
4=4:16bit AI
evt&time
5=5: float AI evt
6=6:double AI evt
7=7:float AI
evt&time
8=8:double AI
evt&time
7=7:float AI
evt&time
1=32 bit AI event; 2=16 bit AI event; 3=32
bit AI event with time; 4=16 bit AI event
with time; 5=float AI event; 6=double AI
event; 7=float AI event with time;
8=double AI event with time.
Default Var Obj 40
1=1:32bit AO
2=2:16bit AO
3=3:AO float
4=4:AO double
2=2:16bit AO 1=32 bit AO; 2=16 bit AO; 3=AO float;
4=AO double.
Default Var Obj 42 1=1:32bit AO evt
2=2:16bit AO evt
3=3:32bit AO
evt&time
4=4:16bit AO
evt&time
5=5:float AO evt
6=6:double AO evt
7=7:float AO
evt&time
8=8:double AO
evt&time
4=4:16bit AO
evt&time
1=32 bit AO event; 2=16 bit AO event;
3=32 bit AO event with time; 4=16 bit AO
event with time; 5=float AO event;
6=double AO event; 7=float AO event with
time; 8=double AO event with time.
4.2 Monitored data
Table 5: DNP3
Parameter
Values (range) Description
Received frames -1...2147483646 Total amount of received DNP3 frames
Transmitted frames -1...2147483646 Total amount of transmitted DNP3 frames
Physical errors -1...2147483646 Total amount of Physical layer errors noticed
Link errors -1...2147483646 Total amount of Link layer errors noticed
Transport errors -1...2147483646 Total amount of Transport layer errors noticed
Mapping errors -1...2147483646 Total amount of Protocol mapping errors noticed
Status True, False Status of communication
Reset counters True, False True = Reset all diagnostic counters
Section 4 1MRS758757 A
DNP3 parameters
30 REC615 and RER615
Communication Protocol Manual
To Next Page
Loading...
