ABB Relion RER615 - Drawing Lines to Create Links

1
GUID-E6B87FCF-9DE1-452F-8F61-AD4CCB33EEEC V2 EN
Figure 70: Graphical Display Editor: adding single-line diagram symbols
into a display page
1 X and Y coordinates
6.1.1.11 Drawing lines to create links
After the apparatus symbols are placed, lines can be drawn to create links.
1. To draw a line, point to the center of the connection point which is visible in two
circles at the end points of a line.
2. Drag the pointer to the destination connection point. Center the pointer again and
release to draw the line.
3. Draw all the necessary line elements.
1MRS757810 C Section 6
LHMI engineering
REC615 and RER615 99
Engineering Manual