M2002-3 v3
See http://www.abb.com/substationautomation for more
details about the tool, PC requirements etc.
21. User interface
Introduction
GUID-B5F4628D-9A5F-4B5B-9B93-89554BA2337D v2
Local human-machine interface LHMI is not supported in
SAM600-IO. However, the user interface functionality can
be achieved using:
• Protection and Control IED Manager PCM600
• SAM600-IO LHMI service kit
There is no LHMI in SAM600-IO. The
SAM600-IO LHMI service kit can be used
to support commissioning, maintenance,
testing and troubleshooting. References
to LHMI in SAM600-IO user
documentation should be read as
SAM600-IO LHMI service kit.
SAM600-IO LHMI service kit
GUID-E29D6926-539D-4BB2-BEBE-C1FF7E919BDC v2
The SAM600-IO LHMI service kit should only be used as a
temporary local human-machine interface (LHMI) to help the
user to trouble shoot a device in field when status
information in PCM600 is limited. It can also be used as a
support tool during commissioning, maintenance or testing
activities.
IEC17000196 V1 EN-US
Figure 31. SAM600-IO LHMI service kit
The SAM600-IO LHMI service kit contains the same
physical LHMI panel as used in 670/650 series which
includes the following elements:
• Display (LCD)
• Keypad
• LED indicators
• Communication port for PCM600
• Serial cable for connection between the SAM600-IO LHMI
service kit and the service port on the device.
670/650 series and SAM600-IO IEC
1MRK 514 012-BEN K
22 Hitachi Power Grids
© 2017 - 2021 Hitachi Power Grids. All rights reserved.
To Next Page
Loading...
