ABB RELION Series Product Guide

22. Ordering
Mounting accessories
M1823-5 v6
Name For case size Quantity Article number
Protection cover for rear area (release 2.1 and earlier):
consisting of a steel cover with a slot for cable entrance at the bottom part, fixing screws
and assembly instruction.
6U x 1/1
RUTAKVADRAT V1 EN-US
1MRK 002 420-AA
Protection cover for rear area (release 2.2 onwards):
consisting of a steel cover with a slot for cable entrance at the bottom part, fixing screws
and assembly instruction.
6U x 1/1
RUTAKVADRAT V1 EN-US
1MRK 002 420-RA
Protection cover for rear area (release 2.1 and earlier):
consisting of a steel cover with a slot for cable entrance at the bottom part, fixing screws
and assembly instruction.
6U x 3/4
RUTAKVADRAT V1 EN-US
1MRK 002 420-AB
Protection cover for rear area (release 2.2 onwards):
consisting of a steel cover with a slot for cable entrance at the bottom part, fixing screws
and assembly instruction.
6U x 3/4
RUTAKVADRAT V1 EN-US
1MRK 002 420-SA
Protection cover for rear area (release 2.1 and earlier):
consisting of a steel cover with a slot for cable entrance at the bottom part, fixing screws
and assembly instruction.
6U x 1/2
RUTAKVADRAT V1 EN-US
1MRK 002 420-AC
Protection cover for rear area (release 2.2 onwards):
consisting of a steel cover with a slot for cable entrance at the bottom part, fixing screws
and assembly instruction.
6U x 1/2
RUTAKVADRAT V1 EN-US
1MRK 002 420-TA
Protection cover for rear area (all releases):
consisting of a steel cover with a slot for cable entrance at the bottom part, fixing screws
and assembly instruction.
6U x 1/4
RUTAKVADRAT V1 EN-US
1MRK 002 420-AE
19” rack mounting kit:
consisting of two mounting angles, fixing screws and assembly instruction. 6U x 1/1
RUTAKVADRAT V1 EN-US
1MRK 002 420-CA
6U x 3/4
RUTAKVADRAT V1 EN-US
1MRK 002 420-BA
6U x 1/2
RUTAKVADRAT V1 EN-US
1MRK 002 420-BB
6U x 1/4
RUTAKVADRAT V1 EN-US
1MRK 002 420-BE
Wall mounting kit for 670 and 650 series:
consisting of 2 mounting angles, 2 mounting bars, fixing screws and assembly
instruction.
All sizes 6U
RUTAKVADRAT V1 EN-US
1MRK 002 420-DA
Wall mounting kit for SAM600-IO:
consisting of 2 mounting angles, 2 mounting bars, fixing screws and assembly
instruction.
All sizes 6U
RUTAKVADRAT V1 EN-US
1MRK 002 420–LA
Flush mounting kit (670 and 650 release 2.1 and earlier):
consisting of 4 fasteners, sealing strip, fixing screws and assembly instruction. All sizes
RUTAKVADRAT V1 EN-US
1MRK 000 020-Y
Flush mounting kit (670 and 650 release 2.2 onwards):
consisting of 2 fasteners, sealing strip, fixing screws and assembly instruction.
All sizes
RUTAKVADRAT V1 EN-US
1MRK 002 420-PA
Side-by-side mounting kit:
consisting of 2 fixing plates, fixing screws and assembly instructions. All sizes
RUTAKVADRAT V1 EN-US
1MRK 002 420-Z
Note: All kits are complete including screws.
670/650 series and SAM600-IO IEC
1MRK 514 012-BEN K
Hitachi Power Grids 23
© 2017 - 2021 Hitachi Power Grids. All rights reserved.

ABB RELION Series Specifications

General

Brand	ABB
Model	RELION Series
Category	Control Unit
Language	English