ABB REM 543 - Page 100

100
1MRS750915-MUM
Machine Terminal
Technical Reference Manual, General
REM 54_
New measurement functions
New condition monitoring functions:
Protocols and communication
• Uploading/downloading of the Relay Configuration Tool project (RCT) from/to
the machine terminal for the Relay Configuration Tool
• Parallel communication support: simultaneous use of the front and rear
connectors was not allowed earlier
Hardware and mechanics
• New mechanics
• External display module
• New CPU module with a communication port for an external display module
• New hardware versions with an RTD/analog module
• One sensor channel added (total of 9 channels)
• Voltage threshold for digital inputs:
• power supply 110/120/220/240 V AC or 110/125/220 V DC with the digital
input voltage range 110/125/220 V DC
• power supply 24/48/60 V DC with the digital input voltage range 24/48/60/
110/125/220 V DC
Tools
• Uploading/downloading of the Relay Configuration Tool project (RCT in
CAP 505) from/to the machine terminal via SPA or LON
• Uploading/downloading of settings (CAP501/CAP505) from/to the machine
terminal via the rear serial port RS-485 of REM 54_ using LON
• Uploading of disturbance recordings to MicroSCADA and CAP 505 via SPA or
LON
Function Description
MEAI1 General measurement 1 / analog input on RTD/analog module
MEAI2 General measurement 2 / analog input on RTD/analog module
...
MEAI8 General measurement 3 / analog input on RTD/analog module
MEAO1 Analog output 1 on RTD/analog module
MEAO2 Analog output 2 on RTD/analog module
MEAO3 Analog output 3 on RTD/analog module
MEAO4 Analog output 4 on RTD/analog module
Function Description
CMGAS3 Three-pole gas pressure monitoring