46 REM615 ANSI 5.0 FP1 MOTOR PROTECTION AND CONTROL
25. Tools
The protection relay is delivered as a preconfigured
unit. The default parameter setting values can be
changed from the frontpanel user interface (local
HMI), the Web browser-based user interface (Web
HMI) or Protection and Control IED Manager
PCM600 in combination with the relay-specific con-
nectivity package.
PCM600 offers extensive relay configuration func-
tions. For example, depending on the protection re-
lay, the relay signals, application, graphical display
and single-line diagram, and IEC 61850 communica-
can be modified with PCM600.
When the Web HMI is used, the protection relay can
be accessed either locally or remotely using a Web
browser (Internet Explorer). For security reasons,
the Web HMI is disabled by default but it can be en-
abled via the local HMI. The Web HMI functionality
can be limited to read-only access.
The relay connectivity package is a collection of
software and specific relay information, which en-
ables system products and tools to connect and in-
teract with the protection relay. The connectivity
packages reduce the risk of errors in system inte-
gration, minimizing device configuration and setup
times.
Further, the connectivity packages for protection
relays of this product series include a flexible up-
date tool for adding one additional local HMI lan-
guage to the protection relay. The update tool is ac-
tivated using PCM600, and it enables multiple
updates of the additional HMI language, thus offer-
ing flexible means for possible future language up-
dates.
Description
Web browser
—
To Next Page
Loading...
Need help?
General
