Need help?Do you have a question about the ABB REM615 ANSI 5.0 FP1 and is the answer not in the manual?
General| Standard | ANSI |
|---|---|
| Version | 5.0 FP1 |
| Rated Frequency | 50/60 Hz |
| Housing | Plastic |
| Type | Feeder protection relay |
| Communication Protocols | Modbus, IEC 61850, DNP3 |
| Mounting | Flush mounting |
| Operating Temperature Range | -40 to +70 °C |
| Protection Functions | Overcurrent, Earth fault, Thermal overload |
| Protection Degree | IP54 |
| Input Voltage | 24-250 V DC / 48-265 V AC |
To Next Page
