19. Ordering for Customized IED
Guidelines
Carefully read and follow the set of rules to ensure problem-free order management. Be aware that certain functions
can only be ordered in combination with other functions and that some functions require specific hardware selections.
Product specification
Basic IED 650 platform and common functions housed in 3U 1/1 sized 19” casing
REQ650 Quantity: 1MRK 006 518-AC
Option:
Customer specific configuration On request
Connection type for Analog modules
Rule: One connection type must be selected
Compression terminals 1MRK 002 960-CA
Ring lug terminals 1MRK 002 960-DA
Connection type for Power supply, Input/Output and communication modules
Rule: One connection type must be selected
Compression terminals 1MRK 002 960-EA
Ring lug terminals 1MRK 002 960-FA
Power supply module
Rule: One Power supply module must be specified
Power supply module
(PSM)
48-125 VDC 1KHL178073R0001
110-250 VDC, 100–240V AC 1KHL178082R0001
Current protection
Rule: One Breaker failure protection must be ordered
Rule: If 3 ph tripping logic has been selected only CCRBRF can be selected. If Phase segregated tripping logic has
been selected only CSPRBRF can be selected.
Breaker failure protection, 3–phase activation and output
(CCRBRF)
Qty: 1MRK 004 908-LA
Breaker failure protection, phase segregated activation
and output (CSPRBRF)
Qty 1MRK 004 908-UA
Breaker protection REQ650 1MRK 505 283-BEN -
Product version: 1.2
ABB 85
To Next Page
Loading...
