1MAC303209-MB C Section 3
Unpacking, inspecting, and storing
620 series 9
Installation Manual
Section 3 Unpacking, inspecting, and storing
3.1 Removing transport packaging
IEDs require careful handling.
1. Examine the delivered products to ensure that they have not been damaged during
the transport.
2. Remove the transport packing carefully without force.
3.2 Inspecting the product
3.2.1 Identifying the product
1. Locate the IED's order number from the label on top of the plug-in unit.
2. Compare the IED's order number with the ordering information to verify that the
received product is correct.
3.2.2 Checking delivery items
Check to ensure that all items are included in the delivery in accordance with the delivery
documents.
3.2.3 Inspecting the IED
IEDs require careful handling before installation on site.
• Check the IED to see if any damage occurred during transportation.
If the IED was damaged during transportation, make a claim against the transport
contractor, and notify the local ABB representative.
3.2.4 Returning an IED damaged in transit
If damage has occurred during transport, the appropriate documentation must be made
with the associated carrier. Please inform the nearest ABB office or representative. ABB
should be notified immediately if there are any discrepancies in relation to the delivery
documents.
The cardboard packaging material is recyclable.
To Next Page
Loading...
