ABB | SACE Emax 2
Predictive analysis program
2 - Service offers
295 | © 2023 ABB | 1SDH001330R1002 - ECN000297030
2 - Service offers
Analysis programs
Two preventive analysis programs are available:
Name
LEAP Easy
Audit
Predictive maintenance
in ABB Ability EDCS
User Customer ABB Service
Circuit-breaker state of aging [on statistical basis] X
Circuit-breaker state of aging [analysis] X
Maintenance X
LEAP Easy Audit
On the basis of the environmental and specific operating conditions of the circuit-breaker in different
types of installation, LEAP AUDIT EASY provides a simple analysis using statistical data for the purpose of
obtaining an estimation of the conditions of the circuit-breaker itself.
LEAP EASY AUDIT can be performed by the actual client, free of charge, after registration in the dedicated
WEB page
(link).
Procedure
1. The client registers in the dedicated WEB page (link). (link).
2. Waiting for mail with credentials to access software online and directly enter certain data
concerning use of the circuit-breaker (serial number of circuit-breaker, application, average annual
environmental conditions and number of operations (opening sequences) since installation).
3. Once this general information has been entered, the customer received a report via mail describing
the condition of his circuit-breaker.
The result is an analysis purely based on statistical data in the absence of access to the complete operating
data of the circuit-breaker.
Predictive maintenance in ABB
Ability EDCS
A section dedicated to predictive maintenance can be activated in ABB Ability EDCS and used to supervise
the conditions of the ABB air circuit-breakers connected in ABB Ability EDCS.
If a maintenance contract has been drawn up with ABB service, evidence of maintenance efficacy will also
be apparent in ABB Ability EDCS.
To Next Page
Loading...
Need help?
General
