ABB | SACE Emax 2
Ekip Touch - Interface and menus
3 - Graphic pages
45 | © 2023 ABB | 1SDH001330R1002 - ECN000297030
Diagnosis bar and Alarm list
The Diagnosis bar lists the faults detected by the unit. It shows a detail of each alarm for about two
seconds.
Figure 15
Select the bar to access the
Alarm List
page, with the list of alarms present.
Figure 16
NOTE:
the Alarm List page also appears when the iTEST button is pressed in the cases
provided for and described on page
39
Each signal is followed by an icon that identifies the type of alarm:
Icon Alarm type
Alarm
Warning, error or prealarm
About
Timing due to tripped protection
The complete list of alarms is given on page 291.
To Next Page
Loading...
