ABB SACE PR212/MP - 9. PR112;P and SACE PR112;PD protection release

ABB SACE SACE PR010/T RH0029002 L2551 9/67
67
3.1 Operation mode menu tree
1° 2° 3° 4° 5° 6° 7° 8° 9°
1. Operation mode
8. Select DUT (PR212/MP)
1. Test
1. Protections 1. Automatic Start test (select SET ELT)
Create
report
1. Manual 1. Default
setting
Start test
2. User setting
Set parameters Start test
2. Trip test
Start test
3. Set coil
Start test
4. Reset coil
Start test
2. Reading
1. Currents Read currents
2. Config./Param.
1. DUT
config./param.
1.Manual
parameters
Display DUT configuration
and parameters
2. Electronic
parameters
Display DUT configuration
and parameters
2.Def.parameters
in PR010/T
1. Only for test Display DUT default
configuration and parameters
2. Operative
Display DUT default
configuration and parameters
3. Inputs
Read inputs
4. Tripping
parameters
Display tripping parameters
5. Information
Read release identification, SW version and Serial Number
3. Programming
1. Change DUT
config./par.
1. DUT
configuration
Change DUT configuration parameters
2.DUT
parameters
(ELT)
Change DUT protection parameters
2. Download
default
parameters
Program DUT with default parameters for normal operation
3. Def. parameters
in PR010/T
1. For test Define DUT protection parameters
2. Operative Define DUT protection parameters