ABB SACE PR212/MP - Indications on Operation

ABB SACE SACE PR010/T RH0029002 L2551 35/67
67
13.2 Indications on operation
• The SACE PR010/T test unit can be used with all SACE PR121/P releases by connecting the
test unit to the protection unit with the cable provided, to be inserted in the test connector on
the front.
• It is not necessary for the auxiliary supply to be present in order to use the above releases with
the PR010/T unit.
• The automatic and manual tests must be performed with the circuit breaker off while the trip
test may be performed only with the circuit breaker on; in either case the circulating currents
must be null.
4. Config/Param
1.
Configurations
1.
Circuit breaker
1.
Display neutral protection
2.
Display plant config.
3.
Display CB TAG Name
4.
Display User Data
2.
Display mains frequency
3.
Local bus unit
1.
Local bus unit presence
2.
Release 1 configuration
3.
Release 2 configuration
4.
Release 3 configuration
5.
Release 4 configuration
6.
Release 6 configuration
7.
Release 7 configuration
8.
Release 8 configuration
1.
Type of signal source Display custom. type
2.
Display source configuration
3.
Release 2 configuration
4.
Release 3 configuration
5.
Release 4 configuration
6.
Release 6 configuration
7.
Release 7 configuration
8.
Release 8 configuration
2.
Protection parameters
1.
Protection L parameters
2.
Protection S parameters
3.
Protection I parameters
4.
Protection G parameters
5. Information
1.
Protection unit information
2.
Circuit breaker information
6. Status
1. Display configuration error
PR121 UNIT
1. Test
2. Measurements
3. History
4. Config/Param
5. Information
6. Status