ABB SACE PR212/MP - Status; 15 SACE PR123;P Protection Release

ABB SACE SACE PR010/T RH0029002 L2551 55/67
67
14.8 Status
On this menu it is possible to view any signals of an error in configuration/wiring of the
protection unit and of the circuit breaker. In particular, one or more of the following messages
may be displayed:
1. No alarm
2. L Prealarm
3. T Prealarm
4. L1 Sensor error
5. L2 Sensor error
6. L3 Sensor error
7. Ne Sensor error
8. Gext sensor error
9. TC disconnected
10. Rating Plug error
11. Installation error
12. Device error
13. Invalid Date
14. Configuration error
15. CB status error
Refer to the release user manual for the solution of the errors indicated.
15. SACE PR123/P
protection release