ABB SACE PR212/MP - Configurations;Parameters; Configurations

ABB SACE SACE PR010/T RH0029002 L2551 63/67
67
15.6 Configurations/parameters
It is possible to display and even modify the configurations and parameters of the release.
15.6.1 Configurations
The configuration parameters available are divided into:
1. Circuit breaker
2. Mains freq.
3. Meas. int. (Measurement interval)
4. Local bus an. Th. (Local bus analog threshold)
5. Startup curr. Th. (startup current threshold)
6. Dual setting
7. Harmonic distortion
8. Modules
9. Local bus unit
10. Data logger
11. System
For example, starting from the main menu, selecting:
enters the screen that displays the configuration parameters of the neutral protection and the
following screen appears:
Pressing the ENTER key launches editing mode (the cursor starts blinking); using the keys  and
 the cursor is positioned on the desired parameter and the keys  and  are used to modify the
value of the parameters in the allowed range.
Key to be
pressed
Item selected
1 Operation mode
x PR123/P
4 Config./Parameters
1 Configurations
1 Circuit breaker
1 Neutral protection
ENTER
Neutral protection
Enable: ON [OFF]
Threshold: 50[...]%