ScreenMaster RVG200 | Paperless recorder | Battery replacement | IN/RandC/006-EN Rev. A 3
5 Setting the time and date
To access the Configuration menus:
1. Touch on the first Operator menus page.
2. Enter an operator password (if configured).
3. Select the Edit Configuration mode by touching the
button.
The System Configuration page is displayed:
4. Press Common.
The Common Configuration menu is displayed:
5. Select Time and press (next to the Date and time
box).
A warning dialog is displayed:
6. Press .
The Date and time menu is displayed:
7. Set the required time and date using the instrument
touchscreen. Once finished, press and exit and
save the configuration as normal.
Important note
Once the battery has been removed, the battery failed
icon is displayed on the front panel of the unit. To
restore normal operation, the correct time and date
must set.
Important note
Changing the time will potentially cause loss of
data. Ensure that all data archiving is up to date
before proceeding.
To Next Page
Loading...
