Page 2 2103956 Rev. AA
Figure 1 Application Tab
3.0 APPLICATION DEFAULTS
The user needs to move into the Flow Measurement application in the tree-view to
view the parameter defaults.
Click on the plus (+) sign next to the Flow Measurement caption to view the other
available options within the Flow Measurement application.
3.1 General Tab
The General tab (see Figure 2) within the Flow Measurement application includes
items such as Device/Application ID string, contract hour, volume calculation period,
log period, Sp/Dp averaging technique and volume and rate unit display selections.
Figure 2 General Tab
To Next Page
Loading...
