Operation Manual / TPL73-B.. - 85-B11/ -B12
8 Disassembly and assembly / 8.9 Installing cartridge group
© Copyright 2018 . All rights reserved. HZTL2480_EN Revision D July 2018
Fitting the diffuser
u Fit the O-rings (77005, 77006) to the wall insert (77000).
u Fit the swivel lifting eyes (90230) and attach lifting gear.
u Align the wall insert (77000) with the threaded holes in the com-
pressor casing internal part (76000) using the dog points at the
swivel lifting eyes (90230) and lower it.
u Loop the lifting gear around the diffuser (79000), align it with the
holes and lower it into position.
u Tighten the screws (76002) as far as possible and then back them off
¼ turn. The screw must be loose and the diffuser must be movable.
Page 117 / 151
To Next Page
Loading...
