Operation Manual / TPL73-B.. - 85-B11/ -B12
8 Disassembly and assembly / 8.3 Silencer casing
© Copyright 2018 . All rights reserved. HZTL2480_EN Revision D July 2018
Fitting
NOTICE
Screws on the silencer casing
All silencer casing screws may be tightened only when assembly work
is finished. Only then is it possible for all parts to be fitted.
u Do not tighten screws during assembly.
u Fit bottom part (1) to filter silencer using screws (A) and (B).
NOTICE
Screw (A)
The position of screw (A) serves as a reference for correct fitting of the
silencer casing.
u Before removal of bottom part (1), mark position of screw (A).
u Fit all remaining screws on bottom part (1).
Page 95 / 151
To Next Page
Loading...
