35
Apparatus
The apparatus can be handled by cranes, fork lift
trucks or using the truck provided by ABB. For
each piece of apparatus follow the instructions
below.
WARNING
• While handling do not put any stress on the
insulating parts and on the apparatus
terminals
• Before handling the apparatus, make sure
that the operating mechanism springs are
discharged and that the apparatus is in the
open position
Handling by crane
Circuit-breaker
Hook the lifting bolts to the relevant supports.
While handling, pay the utmost attention not to
put any stress on the insulating parts or on the
circuit-breaker terminals. Before putting into
service, remove all the lifting eyebolts.
Contactor
To lift the contactor use removable support
shown on Figure 45.
—
5. Dispatch and storage
Figure 43: Correct handling
Figure 44: Wrong handling
Figure 45: Mounting the lifting equipment
To Next Page
Loading...
