ABB UniGear ZS1 - Page 66

66
—
6. Assembly of the switchgear at site
Figure 97: Correct position of the rubber partition
(busbar support) in UniGear ZS1 12 / 17.5 kV panels
Figure 98: Correct position of the rubber partition
(busbar support) in UniGear ZS1 12 / 17.5 kV panels
Figure 99: Correct position of the rubber partition
(busbar support) in UniGear ZS1 24 kV panels
Figure 100: Correct position of the rubber partition
(busbar support) in UniGear ZS1 24 kV panels