- 43 -
000476AG
4 - Lifting and transport
List of components supplied
All the components required to correctly install and connect the inverter
are supplied together with the inverter.
Available components Quantity
Bracket for wall mounting 1
Plug, screws and washer for wall mounting 2 + 2 + 2
M5x10 screw and M5 washer to lock bracket 2 + 2
M5x10 screw and M5 contact washer for external ground
connection
1 + 2
Two-hole gasket for M20 service cable gland and TGM58
cover
1 + 1
Airtight connector for AC cable connection 1
Airtight connector for RS485 serial cable connection 1
TORX TX25 L-key 1
In addition to what is explained in this guide, the safety and installation information provided in the installation manual must be read and followed.
The technical documentation and the interface and management software for the product are available at the website.
XXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXX
ABB solar inverters
Technical documentation 1
Скачано с сайта интернет магазина https://axiomplus.com.ua/
To Next Page
Loading...
