VD4/R - VD4/L - VD4/R-SEC - VD4/L-SEC - INSTALLATION AND OPERATING INSTRUCTIONS 6
—
3. Storing
When the apparatus must be stored for a certain
period of time, our workshops can (on request)
provide suitable packing for the specified storage
conditions.
On arrival, the apparatus must be carefully
unpacked and checked as described in the
Checking on arrival section (chap. 2).
If the apparatus cannot be installed immediately,
it must be repacked in the original packing
materials.
Insert at least one standard packet of special
hygroscopic substance per piece of apparatus
inside the packing.
Should the original packing no longer be available
and the apparatus cannot be installed
immediately, it should be stored indoors in a well-
ventilated, dry, dust-free, noncorrosive
environment, well away from any easily flammable
materials and at a temperature between -5 °C and
+40 °C.
Avoid any accidental impact or positions which
stress the structure of the apparatus.
To Next Page
Loading...
