VersaRupter MV Indoor Switch | Installation and Operation Manual 3
Table of Contents
Introduction 5
Installation and Mounting 6
Mounting and Wiring the Shunt Trip 10
Mounting the Open Fuse Auxiliary Switch 12
Mounting the Open Fuse Auxiliary Switch on Motor Bracket 14
Mounting an Open Fuse Auxiliary Switch with a Shunt Trip 16
Mounting the Auxiliary Switch 19
Installing the Left Hand Shaft Extension 20
Mounting the NM Motor Operator on K-Mechanism 21
Mounting the NM Motor Operator on A-Mechanism 23
Mounting the NM Motor Operator on Left Side of VersaRupter A-mech 25
Mounting the NM Motor Operator on Left Side of VersaRupter K-mech 26
Installing the Type E Ground Switch on VersaRupter 27
Installing the Type E Ground Switch on VersaRupter Fuse Base 28
Installing the Mechanical Interlock 29
Installing the Bottom Mounted Fuse Base with Fuse Tripping 31
Installing the Top Mounted Fuse Base with Fuse Tripping 34
Mounting the HE/HM Operating Handles 37
Installing the Chain Drive Handle 38
Installing the Direct Drive Handle 39
Installing the Back Connect Kit 40
Installing the K-mechanism 41
Installing the A-mechanism 42
Service and Maintenance 43
Replacement of Parts 5-27 kV 45
Replacement of Parts 38 kV 53
Torque Values for Self Tapping Screws 58
Drawings
Outline 59
Back Connect Kit 69
Auxiliary Switch Kit 74
Chain Drive Assembly 75
Left Hand Shaft Extension 76
Mechanical Door Interlock 77
To Next Page
Loading...
