EasyManua.ls Logo

ABB Welcome - Page 47

ABB Welcome
58 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
QR-Code service
www.busch-jaeger-catalogue.com/
8300-0-0080,artikel.html
Article number: 83205 AP-xxx-500
Functions
» The handset is easy to take up and replace
» Three easy operation keys for the basic functions:
opening the door, switching the lights and mute function
» Activating the easy operation keys without lifting the handset
» Differentiating between door call and floor ringing
» Five ring tones can be selected
» Monitoring barrier
» Easy to mount on the surface or install on the commercially
available 58 flush-mounted socket
Technical data
Operating temperature: -5°C+40°C
Protection: IP 30
Single-wire clamps: 2 x 0.6 mm
2
2 x 1 mm
2
Fine-wire clamps: 2 x 0.6 mm
2
2 x 0.75 mm
2
Bus voltage: 28 V ±2 V
ABB-WelcomeTouch
QR-Code service
www.busch-jaeger-catalogue.com/
8300-0-0083,artikel.html
Article number: 83220 AP-xxx-500
Functions
» 17.8 cm (7") large high-quality colour TFT touchdisplay with
intuitive control (resolution of 800 x 480 [WVGA])
» Automatic activation of the camera image at an incoming
door call
» During absence three pictures of the visitor are
automatically stored in the events memory
» Manual recording of pictures during a conversation is
possible at any time
» Events memory: the user is informed who rang the bell at
his front door and when
» Electronic picture frame can be selected in standby mode
» Hands-free function with suppression of noise and echo
interference for audible communication
» Six easy operation keys for the basic functions of
communication, opening of doors, mute function, switching
of lights, snapshot and settings are easy and fast to operate
» Differentiating between door call and floor ringing
» Five ring tones can be selected
» Monitoring barrier
» Five-stage adjustable volume
» Automatic door opening function, opens the front door
when the doorbell button is pressed
» Power supply and data transmission via 2-wire bus;
additional wiring with indoor station for auxiliary power
is not required
Technical data
Operating temperature: -5°C+40°C
Protection: IP 30
Single-wire clamps: 2 x 0.6 mm
2
2 x 1 mm
2
Fine-wire clamps: 2 x 0.6 mm
2
2 x 0.75 mm
2
Bus voltage: 28 V ±2 V
ABB-Welcome
Audio indoor station with handset
User Manual ABB-Welcome | Overview of Range 47

Table of Contents

Other manuals for ABB Welcome

Related product manuals