ABB Zenith ZTS T Series - Chapter 10: Accessories; 10.1 Auxiliary Power Supply and Ekip Modules

—
10. Accessories
Warning
Any troubleshooting should be conducted by
trained and authorized personnel only.
Appropriate personal protectiveequipment
(PPE) shall be used when troubleshooting the
ATS panel.
Hazardous voltage may be present. Discon-
nect all power sources before performing
work inside the ATS panel.
Failure to do so may result in serious injury
or death.
More information, see animation:
Installation of accessories - TruONE™ ATS
(https://youtu.be/qV2KoIv38GY).
—
10.1 Auxiliary power supply and Ekip -modules
ZTS(D) T-series 1600-3000 A and ZTSCT
T-series 100-3000 A, 208-480 Vac
Automatic transfer switches can be
equipped with Ekip-modules. Ekip-
modules are mounted with a auxiliary
power supply module, OXEA1. Suitable
Ekip-modules are: Ekip link, signalling and
connectivity modules. For more
information, see Chapter 5, Electronic
accessories.
The maximum number of Ekip-modules
varies by panel ampacity :
• 30-200 A: 3 Ekip modules
• 260-400 A: 4 Ekip modules