ABB ZS1 - Page 19

20 ABB Power Distribution
Figure 3/21: Withdrawable assembly for the withdrawable part with
auxiliary switches
S8 Test position indicator
S9 Service position indicator
10.3 Control wiring plug connection for the withdrawable
assembly
Figure 3/20: Pole side of a withdrawable part with circuit-breaker of
the high current type VD4
13.9 Protective cap used during transport
(remove before putting into service)
13.13 Lifting lug
(remove before putting into service)
Figure 3/19: View of the circuit-breaker compartment with the
withdrawable part removed and the shutters open
4.1 Contact pin
5 Isolating tulip
12.1 Shutter
43.3 Duct covering of the internal control wiring (above)
12.1
5
4.1
Figure 3/18: Lock for the circuit-breaker and cable compartment
14.9 Padlock
43.3
S 9
S 8
10.3
13.13
13.9
14.9