Need help?Do you have a question about the ABB Zenith ZBTS T Series and is the answer not in the manual?
General| Bypass Isolation | Optional |
|---|---|
| Short Circuit Current Rating | Up to 200 kA |
| Series | ZBTS T |
| Poles | 3, 4 |
| Voltage | 600 V |
| Standards | UL 1008, CSA C22.2 No. 178 |
| Controller | Microprocessor-based |
| Transfer Type | Open, Closed, Delayed |
| Enclosure | NEMA 1, NEMA 3R, NEMA 12 |
| Operating Mechanism | Motorized |
| Application | Critical Power, Emergency Systems |
| Amperage | 400 A, 600 A, 800 A, 1000 A, 1200 A, 1600 A, 2000 A, 2500 A, 3000 A, 4000 A |
Inspect for transit damage, file claims promptly, keep in original packaging until installation.
Store in a clean, dry, temperature-controlled environment to prevent condensation.
Detailed precautions for electric shock, explosion, arc flash: PPE, qualified personnel, de-energizing.
Steps for performing hi-pot or dielectric tests, including connector removal and mechanism handling.
Covers introduction, hazard categories, warranty, product specification, and definitions.
Describes the ATS/Bypass switch functionality, components, HMI, and features.
Details HMI usage, menu navigation, LED indicators, and basic switch handling.
Introduces Ekip modules, power supply, signalling, and communication options.
Lists alarms, warnings, troubleshooting steps, technical specifications, and circuit diagrams.
Covers system inspection, mounting, lifting, and electrical connections.
Guides on mounting Ekip modules and illustrates wiring routes within the cabinet.
Outlines maintenance principles, routine inspection, service tips, and module details.
Presents detailed diagrams showing physical dimensions, mounting points, and internal layouts.
To Next Page
