2
99
34ZBTS_30-1200A rev.A / 1SCC303043M0201
3
9.7.3.1 Other Features of TPME_
• Meets and/or exceeds the requirements
of UL 1449 3rd Edition, cUL, NEMA LS-1
and NEC Article 285
• Thermally protected MOVs eliminate the
need for additional upstream overcur-
rent protection
• Factory wired, no field connections (ex-
cept remote alarm contacts)
All specified documents of Integrated
SPD are delivered with the cabinet. See
drawing 71R-2097.
—
Table 9.10 Technical Data, Integrated SPD for ATS,
type TPME_
—
Fig. 9.19 Integrated SPD, type TPME_
9.7.3 Integrated SPD, Type TPME_
Surge Protective Devices (SPD) have be-
come a standard component in today’s
data centers, office buildings and manu-
facturing facilities because they improve
equipment uptime and reduce expensive
facility equipment repairs. SPD have al-
ways been regarded as best in class.
This important component is available as
accessory factory-mounted inside Zenith
Bypass-Isolation automatic transfer
switch for optimal facility equipment
protection.
Integral SPD is factory wired to the load-
side of the ATS to minimize lead lengths
and provide the highest possible surge
protection for the connected critical
loads. The integral mounting conserves
wall space and reduces installation costs.
Technical Specifications
Operating
Frequency:
Connection:
ATS)
Operating
Temperature:
Operating
Humidity:
Weight:
To Next Page
Loading...
