12
Zenith ZBTS T-series 100-1200A, INSTALLATION AND OPERATING INSTRUCTION
1
—
1.2 Warranty
This document is based on information
available at the time of its publication.
While efforts have been made to ensure
accuracy, the information contained
herein does not cover all details or varia-
tions in hardware and software, nor does
it provide for every possible contingency
in connection with installation, operation,
and maintenance. Features may be de-
scribed herein that are not present in all
hardware and software systems.
ABB Zenith assumes no obligation of no-
tice to holders of this document with re-
spect to changes subsequently made.
ABB Zenith makes no representation or
warranty, expressed, implied, or statu-
tory, and assumes no responsibility for
the accuracy, completeness, sufficiency,
or usefulness of the information con-
tained herein. No warrantees of mer-
chantability or fitness for purpose shall
apply.
Contact your local sales office if further
information is required concerning any
aspect of the Zenith ZBTS T-series By-
pass-Isolation automatic transfer switch
operation or maintenance.
Warranty Period
The Warranty Period for Zenith ZBTS T-se-
ries Bypass-Isolation automatic transfer
switch products is twenty-four (24)
months from the date of shipment.
Notes:
This warranty is valid only for products
sold in the United States – consult your lo-
cal ABB representative for Non-US war-
ranty terms and conditions.
For support in the United States, contact
service team at: +1 800 637 1738 or
epis.pqservice@abb.com for 24-hour
support.
For international support, contact
epis.pqservice@abb.com.
To Next Page
Loading...
