47
34ZBTS_30-1200A rev.A / 1SCC303043M0201
1
—
4.2 Ekip Supply Module
The Ekip Supply is a power supply acces-
sory module.
4.2.1 Electrical Characteristics
The following table lists the electrical
characteristics:
Power supply
voltages
Frequency Power input
Module: Ekip Supply 24-48Vdc
-
The Ekip supply module is factory-in-
stalled in the Connection Module of the
draw-out switch (always ATS). There is a
possibility to add to the Connection Mod-
ule one Ekip module according to your
choice powered by Ekip Supply module,
see Chapter 8.
For external wiring cable cross sections are:
• K1+ / K2-; AWG 22-16 / 0,5-1,4 mm
2
• W3 / W4; AWG 26-20 / flexible, with fer-
rule; with plastic sleeve 0,25-0,34mm
2
/
without plastic sleeve 0,25-0,5mm
2
See the wiring routes in the cabinet,
Fig. 4.9.
4.2.2 Signallings
The following table illustrates the possi-
ble signals, and their meaning:
Pos. Description
A Power LED, green. The possible states are:
• Off: power supply absent.
• On fixed: power supply present.
—
Fig. 4.6 Ekip Supply module is factory-installed with Ekip
Signalling 2K modules to the Connection Module in draw-out
switches (always in ATS). It is possible to add one Ekip module
to the Connection Module powered by Ekip Supply module
—
Fig. 4.7 Ekip Supply, signalling
—
Fig. 4.8 Ekip Supply, wiring
A
To Next Page
Loading...
