2
69
34ZBTS_30-1200A rev.A / 1SCC303043M0201
—
Installation Instruction
Bypass-Isolation
Automatic Transfer
Switches Zenith ZBTS
T-series 100-1200A
7. Installation 70
7.1 Final System Inspection 70
7.1.1 Mounting / Lifting 71
7.1.2 Lifting the Draw-out Switch 72
7.2 Installation 74
7.2.1 Power Connections with Screw Type
Terminals (as standard) 74
7.2.2 Power Connections with Compression
Lugs (option) 75
7.2.3 Ground Connections with Screw Type
Terminals 76
7.2.4 Neutral Connections with Screw Type
Terminals 76
7.2.5 Conduit Area, Top Cable Entry 76
7.2.6 Cable Entry from Bottom /
Adapter Bay 77
7.2.7 Engine/Generator Start Control
Connections 77
7.2.8 Customer Connections, I/O Signals 78
8. Mounting of Accessories 79
8.1 Ekip -Modules 79
8.1.1 Mounting of Ekip –modules to the
fixed Bypass switch 80
8.1.2 Mounting of the Ekip –modules to
the draw-out switches 81
8.2 Wiring routes of I/O-connections / Ekip
-modules inside the cabinet 82
To Next Page
Loading...
