ABB Zenith ZBTS T Series - Using the Control Interface HMI; Keypad; Navigating in Menu

27
34ZBTS_30-1200A rev.A / 1SCC303043M0201
1
—
3.2 Using the Control Interface HMI
3.2.1 Keypad
Keypad functionality in HMIs is similiar for
both Bypass and ATS switches
1 Home Button: Opens up the root
menu or brings user to the homepage
if defined. While viewing a specific
page, it can be defined as the home
page by pressing the home button for
3 seconds. All pages, except for the
menus, can be set as home page.
Home page is automatically shown
after inactivity.
2 I ON: Operate switch to I position.
3 II ON: Operate switch to II position.
4 O OFF: Operate switch to O position
and disable automatic control mode
(only in delayed transition I-O-II type).
3.2.2 Navigating in Menu
See the detailed menu tree in the manual:
Automatic transfer switches
TruONE™ ATS, OX_ 30. . .1600_,
34OX_30-1600 / 1SCC303011M0201,
Chapter 4.
—
Fig. 3.2 Keypad in Level 4 HMI with touch screen,
similiar for both Bypass and ATS switches
l
ON
ll
ON
O
OFF
2
1
4 3
l
ON
ll
ON
AUTO
!
S1 S2
LOAD
l
ll
2
1
3