11
34ZBTS_30-1200A rev.A / 1SCC303043M0201
1
—
1. Introduction
Operating instruction part of the manual
(Chapters 1...6) describes the basic oper-
ation of the Bypass-isolation automatic
transfer switches Zenith ZBTS T-series
100-1200A, manufactured by ABB.
Mounting instructions for the Bypass-iso-
lation automatic transfer switches and for
the available accessories, see Part 2,
Chapters 7 and 8.
The regular maintenance instructions and
useful tricks for service operations are
descriped in Part 3, Chapter 9.
Dimension drawings, see Part 4,
Chapter 10.
—
1.1 Hazard Categories
The following important highlighted in-
formation appears throughout this docu-
ment to warn of potential hazards or to
call attention to information that clarifies
a procedure.
Carefully read all instructions and become
familiar with the devices before trying to
install, operate, service or maintain this
equipment.
Danger
Indicates a hazardous situation that, if not
avoided, will result in death or serious injury
or equipment damage.
Warning
Indicates a hazardous situation that, if not
avoided, could result in death or serious injury
or equipment damage.
Caution
Indicates a hazardous situation that, if not
avoided, could result in minor or moderate in-
jury. Failure to comply with these instructions
may result in product damage.
Notice
It is used to notify of practices not related to
personal injury. Failure to comply with these
instructions may result in product damage.
The safe operation of your Bypass-Isola-
tion Automatic Transfer Switch is ABB’s
focus. The proper storage, installation,
operation and maintenance will help in-
crease the life of Bypass-Isolation Auto-
matic Transfer Switch.
To Next Page
Loading...
