3
34ZBTS_30-1200A rev.A / 1SCC303043M0201
1
—
Receiving, Handling and Storage
Receiving and Handling
Upon receipt, carefully inspect the By-
pass-Isolation Automatic Transfer Switch
for damage that may have occurred
during transit. If damage is evident, or
there is visible indication of rough han-
dling, immediately file a damage claim
with the transportation company, and no-
tify your local ABB sales office.
Do not remove the shipping package until
ready to install the Bypass-Isolation Auto-
matic Transfer Switch.
Storage
If the unit will not be placed into service
immediately, store the Bypass-Isolation
Automatic Transfer Switch on its original
package in a clean, dry location. To pre-
vent condensation, maintain a uniform
temperature. Store the unit in a tempera-
ture controlled building, allowing ade-
quate air circulation and protection from
dirt and moisture. Storing the unit out-
doors could cause harmful condensation
inside the Bypass-Isolation Automatic
Transfer Switch enclosure.
HAZARD OF EQUIPMENT
OVERTURNING
When moving with a fork lift, do not re-
move the shipping package until the de-
vice is in its final location.
Warning
Hazard of equipment overturning. Failure to
follow this instruction will result in personal
injury or equipment damage.
To Next Page
Loading...
