Abbott Eterna 32400 - Product Identification and Registration; Bluetooth Low Energy Specifications

interference in a residenal installaon. This equipment generates, uses, and can radiate radiofrequency
energy and, if not installed and used in accordance with the instrucons, may cause harmful interference to
radio communicaons. However, there is no guarantee that interference will not occur in a parcular
installaon. If this equipment does cause harmful interference to radio or television recepon, which can be
determined by turning the equipment o and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
▪ Reorient or relocate the receiving antenna.▪
▪
Increase the separaon between the equipment and receiver.
▪
▪ Connect the equipment into an outlet on a circuit dierent from that to which the receiver is
▪
connected.
▪ Consult the dealer or an experienced radio/TV technician for help.
▪
Operaon is subject to the following two condions:
▪ This device may not cause harmful interference.
▪
▪ This device must accept any interference received, including interference that may cause undesired▪
operaon.
Modicaons not expressly approved by the manufacturer could void the user’s authority to operate the
equipment under FCC rules.
Idencaon Informaon for Product Registraon
This device has a label that contains, among other informaon, a product idener in the following format:
Table 6. Registraon idencaon informaon
Idener Type Registraon Idener
FCC registraon number PX2-GMIPG1
Wireless Technology Informaon
The following table summarizes the technical details of the Bluetooth
® Low Energy as it is implemented in
the device.
Table 7.
Bluetooth® Low Energy informaon
Antenna type Modied monopole
Antenna dimensions 10.7 mm x 4.3 mm x 3.0 mm
Modulaon GFSK
Output power (EIRP*) 2 mW (+3 dBm) typical
Duty cycle 14.1% or less over 6 min period
Range Up to 2 m typical
Center frequency 2.44 GHz
Channel frequency range 2.402 GHz to 2.480 GHz
Channel 40 logical channels using AFH
Bandwidth per channel 2 MHz
Data ow Bi-direconal
Protocol
Bluetooth® Low Energy
Semi-duplex capability Yes
*EIRP
=
Equivalent isotropically radiated power (not duty cycle adjusted)
16